72401L45SO8
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Packaging | Tape & Reel |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | FALL THRU 30NS |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 35mA |
| Max Supply Current | 35mA |
| Clock Frequency | 45MHz |
| Access Time | 19 ns |
| Organization | 64X4 |
| Density | 256 b |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 4b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | No |
| Output Enable | NO |
| Cycle Time | 22.22 ns |
| Height Seated (Max) | 2.65mm |
| Length | 10.4mm |
| Width | 7.6mm |
| Thickness | 2.34mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72401L45SO8 Overview
FIFO memory chip can be found in the SOIC package.In terms of packaging, it comes in Tape & Reel cases.Mounting it Surface Mount is recommended.It is possible to achieve high efficiency with a supply voltage of 5V .FIFO consists of 16 terminations, which indicates that FIFO means is empty.Operation pins are 16 .Its maximum operating current is 35mA .When the supply voltage is set to 5V , the FIFO's maximum efficiency is achieved.It is designed to run at a minimum temperature of 0°C degrees Celsius to ensure reliability.An operating temperature of 70°C °C is necessary for stable operation.A self-contained gadget is contained within FIFOs .A OTHER FIFO memory type IC is used in the part.FIFO memory chips may be operated at very low supply voltages, such as 4.5V volts.The memory logic's maximum supply voltage is 5.5V volts.There are a total of 16 pins on this board.In normal circumstances, the component has 5V power supplies.It is also possible to generate FALL THRU 30NS with the use of this FIFO memory.This FIFO memory IC operates at a frequency of 45MHz .
72401L45SO8 Features
FIFOs category
Clock frequency of 45MHz
72401L45SO8 Applications
There are a lot of Integrated Device Technology (IDT) 72401L45SO8 FIFOs Memory applications.
- Code converters
- Notebook
- Transistors
- Video time base correction
- Wireless
- Portable Information Devices
- Down-Hole Energy Drilling
- Thermal Management for DDR3 Memory Modules
- Test Equipment
- Consumer
