72403L10P
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mount | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 16 |
| Packaging | Bulk |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | FALL THRU 65NS |
| Subcategory | FIFOs |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Memory Size | 32B |
| Element Configuration | Dual |
| Nominal Supply Current | 35mA |
| Max Supply Current | 35mA |
| Frequency (Max) | 10MHz |
| Access Time | 55 ns |
| Data Bus Width | 4b |
| Organization | 64X4 |
| Density | 256 b |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 4b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | No |
| Output Enable | YES |
| Length | 19mm |
| Width | 7.62mm |
| Thickness | 3.3mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72403L10P Overview
You can find FIFO memory chip in package PDIP .There is a case Bulk in which it is packaged.In addition, the FIFO chip has a memory capacity of 32B , which can be used to store applications and data.The recommended mounting way is Through Hole .When the supply voltage is 5V there is the possibility of high efficiency.As a result of this, FIFO means contains 16 terminations.The operation pins are 16 pins.FIFO requires a minimum of 35mA current to operate.In order to maximize efficiency, the supply voltage should be set to 5V .In order to ensure reliability, FIFO is maintained at 0°C degrees Celsius at all times.An operating temperature of 70°C °C is necessary for stable operation.The gadget is self-contained and can be found in FIFOs .This part has a memory type of OTHER FIFO .Typically, FIFO would work at 4.5V volts, but it may also work at higher voltages.The memory logic's maximum supply voltage is 5.5V volts.Approximately 16 pins are attached to it.Regular operation has a FIFO memory's maximum value of 10MHz .Normally, the component owns 5V power supplies.With the help of this FIFO memory, FALL THRU 65NS can also be generated.The 1 circuit is used in order to enhance its flexibility.
72403L10P Features
32B memory size
FIFOs category
Frequency at most
72403L10P Applications
There are a lot of Integrated Device Technology (IDT) 72403L10P FIFOs Memory applications.
- Digital buffering
- GPS Offender Tracking
- SPI Bus Flash Memory Devices
- Extended product life cycle
- Video time base correction
- A/D output buffers
- Game Controller
- High-speed disk
- Computers
- Product traceability
