72403L10SO
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | FALL THRU 65NS |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 35mA |
| Max Supply Current | 35mA |
| Clock Frequency | 10MHz |
| Access Time | 55 ns |
| Organization | 64X4 |
| Density | 256 b |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 4b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | No |
| Output Enable | YES |
| Cycle Time | 100 ns |
| Height Seated (Max) | 2.65mm |
| Length | 10.4mm |
| Width | 7.6mm |
| Thickness | 2.34mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72403L10SO Overview
You can find FIFO memory chip in package SOIC .A Surface Mount mounting method is recommended.If the supply voltage is set to 5V , high efficiency can be achieved.16 terminations are contained in FIFO means.16 pins are used for operation.In order for FIFO design to operate, a maximum current of 35mA is required.FIFO is recommended that the supply voltage be set to 5V for maximum efficiency.For reliability, FIFO works at a minimum temperature of 0°C degrees Celsius.Its maximum operating temperature of 70°C °C ensures stable operation.There is a self-contained gadget within FIFOs .This part has a memory type of OTHER FIFO .FIFO memory chips may be operated at very low supply voltages, such as 4.5V volts.A maximum supply voltage of 5.5V volts can be handled by the FIFO memory chip.It has a total of 16 pins on it.Normaly, the component is powered by 5V power supplies.Additionally, this FIFO memory is capable of generating FALL THRU 65NS as well.The FIFO memory IC's clock runs at a frequency of 10MHz .
72403L10SO Features
FIFOs category
Clock frequency of 10MHz
72403L10SO Applications
There are a lot of Integrated Device Technology (IDT) 72403L10SO FIFOs Memory applications.
- IP Radio
- Seismic Data Collection at Extreme Temperatures
- Medical Monitoring Device
- Smart Meter
- Communications
- High-speed graphics pixel buffer
- Network bridges
- General Data Collection Applications at Low-Temperatures
- One assembly
- Communications Systems
