72403L10SO8
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | FALL THRU 65NS |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 35mA |
| Max Supply Current | 35mA |
| Clock Frequency | 10MHz |
| Access Time | 55 ns |
| Organization | 64X4 |
| Density | 256 b |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 4b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | No |
| Output Enable | YES |
| Cycle Time | 100 ns |
| Height Seated (Max) | 2.65mm |
| Length | 10.4mm |
| Width | 7.6mm |
| Thickness | 2.34mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72403L10SO8 Overview
The SOIC package contains FIFO memory chip.Mounting it in the Surface Mount way is recommended.Supply voltages of 5V are capable of achieving high efficiency.FIFO means contains 16 terminations.As far as the operation pins are concerned, they are 16 pins.In order for FIFO design to operate, a maximum current of 35mA is required.Set the supply voltage to 5V to ensure FIFO's maximum efficiency.The FIFO products must be run at a minimum temperature of 0°C degrees Celsius to ensure reliability.An operating temperature of 70°C °C is necessary for stable operation.It is contained within FIFOs .In this part, the memory type is OTHER FIFO .Typically, FIFO would work at 4.5V volts, but it may also work at higher voltages.This FIFO memory chip can handle maximum supply voltages of 5.5V volts.Approximately 16 pins are attached to it.It is normal for a component to be equipped with 5V power supplies.It is also possible to generate FALL THRU 65NS using this FIFO memory.The clock of the FIFO memory IC runs at 10MHz frequency.
72403L10SO8 Features
FIFOs category
Clock frequency of 10MHz
72403L10SO8 Applications
There are a lot of Integrated Device Technology (IDT) 72403L10SO8 FIFOs Memory applications.
- Analog-to-digital converters
- Down-Hole Energy Drilling
- Buses
- PC peripheral
- General Data Collection Applications at Extreme High-Temperatures
- Alarm System
- Data
- Game Controller
- SPD for DDR3 Memory Modules
- Portable Information Devices
