72403L15P
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mount | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 16 |
| Packaging | Bulk |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | FALL THRU 65NS |
| Subcategory | FIFOs |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Memory Size | 32B |
| Element Configuration | Dual |
| Nominal Supply Current | 35mA |
| Max Supply Current | 35mA |
| Frequency (Max) | 15MHz |
| Access Time | 40 ns |
| Data Bus Width | 4b |
| Organization | 64X4 |
| Density | 256 b |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 4b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | No |
| Output Enable | YES |
| Cycle Time | 66.67 ns |
| Length | 19mm |
| Width | 7.62mm |
| Thickness | 3.3mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72403L15P Overview
FIFO memory chip can be found in the PDIP package.There is a case Bulk in which it is packaged.There is a memory of 32B on the FIFO chip that can be used to store applications and data.Mounting it Through Hole is recommended.When the supply voltage is 5V , high efficiency is possible.FIFO means contains 16 terminations.16 pins are used for operation.In order for FIFO design to operate, FIFO design requires a maximum current of 35mA .When setting the supply voltage to 5V , you will achieve FIFO's maximum efficiency.To ensure reliabilFIFOy, FIFO runs at a minimum working temperature of 0°C degrees Celsius.By operating at a temperature of 70°C °C, the FIFO products is capable of stable operation.In FIFOs , this gadget is self-contained.It has a OTHER FIFO memory type IC.Typically, FIFO would work at 4.5V volts, but it may also work at higher voltages.An input voltage of 5.5V V is the maximum that FIFO memory can handle.There are a total of 16 pins on this board.Normally, the FIFO memory's maximum value is 15MHz .The component normally owns 5V power supplies.Additionally, this FIFO memory can be used to generate FALL THRU 65NS .By using 1 circuits, FIFO memory chip achieves enhanced flexibility.
72403L15P Features
32B memory size
FIFOs category
Frequency at most
72403L15P Applications
There are a lot of Integrated Device Technology (IDT) 72403L15P FIFOs Memory applications.
- Event Recorder
- Video time base correction
- IP Camera Buffer
- SPI Bus Flash Memory Devices
- Temporary storage elements
- Tape controllers
- A/D output buffers
- Data
- Consumer Systems
- Smart Meter
