72403L15SO
| Parameters | |
|---|---|
| Height Seated (Max) | 2.65mm |
| Length | 10.4mm |
| Width | 7.6mm |
| Thickness | 2.34mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | FALL THRU 65NS |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 35mA |
| Max Supply Current | 35mA |
| Clock Frequency | 15MHz |
| Access Time | 40 ns |
| Organization | 64X4 |
| Density | 256 b |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 4b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | No |
| Output Enable | YES |
| Cycle Time | 66.67 ns |
72403L15SO Overview
SOIC is a package that contains FIFO memory chip.Surface Mount is recommended as the mounting method.It is possible to achieve high efficiency with a supply voltage of 5V .In FIFO means, there are 16 terminations.These are the 16 pins for operation.In order to operate it, it requires 35mA volts of current.FIFO is recommended that the supply voltage be set to 5V for maximum efficiency.In order to ensure reliability, FIFO is maintained at 0°C degrees Celsius at all times.By operating at a temperature of 70°C °C, the FIFO products is capable of stable operation.The gadget in FIFOs is self-contained.It has a type OTHER FIFO memory IC.It is possible to operate the FIFO memory chip at very low supply voltages, such as 4.5V volts.This FIFO memory chip can handle maximum supply voltages of 5.5V volts.As a result, it contains a total of 16 pins.A component normally has 5V power supplies attached to it.It is also possible to generate FALL THRU 65NS using this FIFO memory.A clock running at frequency 15MHz is used by the FIFO memory IC.
72403L15SO Features
FIFOs category
Clock frequency of 15MHz
72403L15SO Applications
There are a lot of Integrated Device Technology (IDT) 72403L15SO FIFOs Memory applications.
- MP3 Interface for Automobile
- SPD for DDR3 Memory Modules
- Routers
- Test Equipment
- Down-Hole Energy Drilling
- Data communications
- Extended product life cycle
- Multimedia
- Multi-stage synchronizer
- IP Camera Buffer
