72403L25P
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mount | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 16 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | FALL THRU 40NS |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 35mA |
| Max Supply Current | 35mA |
| Clock Frequency | 25MHz |
| Access Time | 34 ns |
| Organization | 64X4 |
| Density | 256 b |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 4b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | No |
| Output Enable | YES |
| Cycle Time | 40 ns |
| Height Seated (Max) | 4.191mm |
| Length | 19mm |
| Width | 7.62mm |
| Thickness | 3.3mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72403L25P Overview
FIFO memory chip is included in the PDIP package.Mounting it in the Through Hole way is recommended.Supply voltages of 5V are capable of achieving high efficiency.I found that it has 16 terminations in FIFO means.As far as the operation pins are concerned, they are 16 pins.Its maximum operating current is 35mA .A supply voltage of 5V is recommended for FIFO's maximum efficiency.It operates at 0°C degrees Celsius to ensure reliability.70°C °C is the memory logic's maximum operating temperature that allows stable operation.It is contained within FIFOs .ICs of type OTHER FIFO are used in the FIFO memory chip.FIFO may operate at very low supply voltages, such as 4.5V volts.FIFO memory can handle a maximum supply voltage of 5.5V volts.Currently, it has 16 pins.It is normal for the component to own 5V power supplies.It is also possible to generate FALL THRU 40NS with the use of this FIFO memory.The FIFO memory IC's clock runs at a frequency of 25MHz .
72403L25P Features
FIFOs category
Clock frequency of 25MHz
72403L25P Applications
There are a lot of Integrated Device Technology (IDT) 72403L25P FIFOs Memory applications.
- Event Recorder
- Portable Information Devices
- Networking
- Rate buffers
- Consumer Systems
- Notebook
- Thermal Management for DDR3 Memory Modules
- Routers
- General Data Collection Applications at Extreme High-Temperatures
- Down-Hole Energy Drilling
