72403L25SO
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | FALL THRU 40NS |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 35mA |
| Max Supply Current | 35mA |
| Clock Frequency | 25MHz |
| Access Time | 34 ns |
| Organization | 64X4 |
| Density | 256 b |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 4b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | No |
| Output Enable | YES |
| Cycle Time | 40 ns |
| Height Seated (Max) | 2.65mm |
| Length | 10.4mm |
| Width | 7.6mm |
| Thickness | 2.34mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72403L25SO Overview
You will find FIFO memory chip in the SOIC package.Mounting it in Surface Mount is recommended.A supply voltage of 5V is capable of producing high efficiency.FIFO means contains 16 terminations.There are 16 pins for operation.For its operation, 35mA is the maximum current required.For FIFO's maximum efficiency, the supply voltage should be set to 5V .At a minimum working temperature of 0°C degrees Celsius, FIFO is guaranteed to operate reliably.By operating at a temperature of 70°C °C, the FIFO products is capable of stable operation.The gadget in FIFOs is self-contained.There is a memory type OTHER FIFO in the IC of this part.It is possible to operate the FIFO memory chip at very low supply voltages, such as 4.5V volts.There is a maximum supply voltage of 5.5V volts that FIFO memory can handle.A total of 16 pins are present on the FIFO memory IC.Normally, the component owns 5V power supplies.With the help of this FIFO memory, FALL THRU 40NS can also be generated.A clock running at frequency 25MHz is used by the FIFO memory IC.
72403L25SO Features
FIFOs category
Clock frequency of 25MHz
72403L25SO Applications
There are a lot of Integrated Device Technology (IDT) 72403L25SO FIFOs Memory applications.
- Product traceability
- MP3 Interface for Automobile
- Character generators
- Consumer Systems
- Down-Hole Energy Drilling
- Wireless
- Alarm System
- Multi-stage synchronizer
- Seismic Data Collection at Extreme Temperatures
- Industrial Systems
