72403L35P
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mount | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 16 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | FALL THRU 34NS |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Max Supply Current | 35mA |
| Clock Frequency | 35MHz |
| Access Time | 20 ns |
| Organization | 64X4 |
| Density | 256 kb |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 4b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | No |
| Output Enable | YES |
| Cycle Time | 28.57 ns |
| Height Seated (Max) | 4.191mm |
| Length | 19mm |
| Width | 7.62mm |
| Thickness | 3.3mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72403L35P Overview
You will find FIFO memory chip in the PDIP package.Mounting it in the Through Hole way is recommended.A supply voltage of 5V is capable of producing high efficiency.FIFO means contains 16 terminations.16 pins are used for operation.In order for FIFO design to operate, FIFO design requires a maximum current of 35mA .A 5V supply voltage will ensure FIFO's maximum efficiency.At a minimum working temperature of 0°C degrees Celsius, FIFO is guaranteed to operate reliably.The stable operation is enabled by the memory logic's maximum operating temperature of 70°C °C.There is a self-contained gadget within FIFOs .This part has a memory type of OTHER FIFO .Typically, FIFO would work at 4.5V volts, but it may also work at higher voltages.A maximum supply voltage of 5.5V V can be handled by this FIFO memory chip.It consists of a total of 16 pins.Normally, the component owns 5V power supplies.Additionally, this FIFO memory is capable of generating FALL THRU 34NS as well.The FIFO memory IC is controlled by a clock with a frequency of 35MHz .
72403L35P Features
FIFOs category
Clock frequency of 35MHz
72403L35P Applications
There are a lot of Integrated Device Technology (IDT) 72403L35P FIFOs Memory applications.
- Magnetic memories
- High-speed disk
- TVs
- Multimedia
- IP Camera Buffer
- Data-acquisition systems
- High-speed graphics pixel buffer
- Data
- Computer Systems
- Medical Monitoring Device
