Parameters |
Contact Plating |
Lead, Tin |
Mount |
Surface Mount |
Package / Case |
SOIC |
Number of Pins |
16 |
Published |
2009 |
JESD-609 Code |
e0 |
Pbfree Code |
no |
Part Status |
Discontinued |
Moisture Sensitivity Level (MSL) |
1 |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Terminal Finish |
Tin/Lead (Sn85Pb15) |
Max Operating Temperature |
70°C |
Min Operating Temperature |
0°C |
Additional Feature |
FALL THRU 34NS |
HTS Code |
8542.32.00.71 |
Subcategory |
FIFOs |
Technology |
CMOS |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
225 |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
1.27mm |
Pin Count |
16 |
Operating Supply Voltage |
5V |
Power Supplies |
5V |
Temperature Grade |
COMMERCIAL |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
4.5V |
Element Configuration |
Dual |
Nominal Supply Current |
35mA |
Max Supply Current |
35mA |
Clock Frequency |
35MHz |
Access Time |
20 ns |
Organization |
64X4 |
Density |
256 b |
Parallel/Serial |
PARALLEL |
Sync/Async |
Asynchronous |
Word Size |
4b |
Memory IC Type |
OTHER FIFO |
Bus Directional |
Unidirectional |
Retransmit Capability |
No |
Output Enable |
YES |
Cycle Time |
28.57 ns |
Height Seated (Max) |
2.65mm |
Length |
10.4mm |
Width |
7.6mm |
Thickness |
2.34mm |
RoHS Status |
RoHS Compliant |
Lead Free |
Contains Lead |
72403L35SO Overview
FIFO memory chip can be found in the SOIC package.It is recommended that memory IC be mounted in the Surface Mount direction.An input voltage of 5V results in high efficiency.The number of terminations in FIFO means is 16 .The operation pins are 16 pins.In order to operate it, it requires 35mA volts of current.FIFO is recommended that the supply voltage be set to 5V for maximum efficiency.FIFO operates at a minimum temperature of 0°C degrees Celsius to ensure reliabilFIFOy.A memory logic's maximum operating temperature of 70°C degrees Celsius assures stable operation.It is self-contained in FIFOs .ICs of type OTHER FIFO are used in the FIFO memory chip.It is possible to operate the FIFO memory chip at very low supply voltages, such as 4.5V volts.A maximum voltage of 5.5V volts can be applied to FIFO memory.It has a total of 16 pins on it.Normally, the component owns 5V power supplies.It is also possible to generate FALL THRU 34NS using this FIFO memory.This FIFO memory IC has a clock frequency of 35MHz .
72403L35SO Features
FIFOs category
Clock frequency of 35MHz
72403L35SO Applications
There are a lot of Integrated Device Technology (IDT) 72403L35SO FIFOs Memory applications.
- Event Recorder
- Computers
- IP Radio
- Cameras
- HDD
- Look-up Tables
- Portable Information Devices
- Magnetic memories
- Seismic Data Collection at Extreme Temperatures
- General Data Collection Applications at Low-Temperatures