72403L45P
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mount | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 16 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | FALL THRU 30NS |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 35mA |
| Max Supply Current | 35mA |
| Clock Frequency | 45MHz |
| Access Time | 19 ns |
| Organization | 64X4 |
| Density | 256 b |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 4b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | No |
| Output Enable | YES |
| Cycle Time | 22.22 ns |
| Height Seated (Max) | 4.191mm |
| Length | 19mm |
| Width | 7.62mm |
| Thickness | 3.3mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72403L45P Overview
This package is included in PDIP .Memory IC's recommended mounted way is Through Hole .When the supply voltage is 5V there is the possibility of high efficiency.A total of 16 terminations can be found in FIFO means.There are 16 pins on the operation pins.In order to operate it, it requires 35mA volts of current.In order to maximize efficiency, the supply voltage should be set to 5V .The FIFO products must be run at a minimum temperature of 0°C degrees Celsius to ensure reliability.The stable operation is enabled by the memory logic's maximum operating temperature of 70°C °C.The gadget is self-contained and can be found in FIFOs .This part has a memory type of OTHER FIFO .Low supply voltages, such as 4.5V V, may be required for operation.FIFO memory is capable of handling a maximum supply voltage of 5.5V volts.The FIFO memory IC has a total of 16 pins.In normal circumstances, the component has 5V power supplies.The gadget can also generate a value of FALL THRU 30NS .In this FIFO memory IC, the clock runs at frequency 45MHz .
72403L45P Features
FIFOs category
Clock frequency of 45MHz
72403L45P Applications
There are a lot of Integrated Device Technology (IDT) 72403L45P FIFOs Memory applications.
- Multi-stage synchronizer
- Event Recorder
- Video Processing
- Data
- Smart Meter
- Networking
- Character generators
- Tape controllers
- Buses
- Analog-to-digital converters
