72413L25SO
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 20 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | FALL THRU 40NS |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Pin Count | 20 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Access Time | 25 ns |
| Organization | 64X5 |
| Density | 320 b |
| Standby Current-Max | 0.00006A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 5b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | No |
| Output Enable | YES |
| Cycle Time | 40 ns |
| Height Seated (Max) | 2.65mm |
| Length | 12.8mm |
| Width | 7.6mm |
| Thickness | 2.34mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72413L25SO Overview
FIFO memory chip is included in the SOIC package.The recommended mounting way is Surface Mount .If the supply voltage is set to 5V , high efficiency can be achieved.In FIFO means, there are 20 terminations.The operation pins are 20 pins.For its operation, 60mA is the maximum current required.A supply voltage of 5V is recommended for FIFO's maximum efficiency.It operates at 0°C degrees Celsius to ensure reliability.By using a memory logic's maximum operating temperature of 70°C degrees Celsius, stable operation can be achieved.FIFOs contains this gadget in its entirety.There is a memory type OTHER FIFO in the IC of this part.There is a possibility that FIFO can operate at very low supply voltages, such as 4.5V V.There is a maximum supply voltage of 5.5V volts that FIFO memory can handle.Approximately 20 pins are attached to it.There are normally 5V power supplies attached to the component.Additionally, this FIFO memory can be used to generate FALL THRU 40NS .
72413L25SO Features
FIFOs category
72413L25SO Applications
There are a lot of Integrated Device Technology (IDT) 72413L25SO FIFOs Memory applications.
- Industrial Systems
- Video time base correction
- Cardiac Monitoring Device
- Test Equipment
- Signal processing
- Medical Monitoring Device
- PC peripheral
- Network bridges
- Queues for communication systems
- Alarm System
