72413L25SO8
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 20 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | FALL THRU 40NS |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Pin Count | 20 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Access Time | 25 ns |
| Organization | 64X5 |
| Density | 320 b |
| Standby Current-Max | 0.00006A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 5b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | No |
| Output Enable | YES |
| Cycle Time | 40 ns |
| Height Seated (Max) | 2.65mm |
| Length | 12.8mm |
| Width | 7.6mm |
| Thickness | 2.34mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72413L25SO8 Overview
FIFO memory chip is contained in the SOIC package.Mounting it in Surface Mount is recommended.When the supply voltage is 5V , high efficiency is possible.A total of 20 terminations are contained within FIFO means.There are 20 pins on the operation pins.In order for FIFO design to operate, a maximum current of 60mA is required.FIFO is recommended that the supply voltage be set to 5V in order to maximize efficiency.The FIFO products must be run at a minimum temperature of 0°C degrees Celsius to ensure reliability.Its maximum operating temperature of 70°C °C ensures stable operation.There is a self-contained gadget within FIFOs .It has a type OTHER FIFO memory IC.Low supply voltages, such as 4.5V V, may be required for operation.A maximum voltage of 5.5V volts can be applied to FIFO memory.There are a total of 20 pins on this board.A component normally has 5V power supplies attached to it.Additionally, this FIFO memory can be used to generate FALL THRU 40NS .
72413L25SO8 Features
FIFOs category
72413L25SO8 Applications
There are a lot of Integrated Device Technology (IDT) 72413L25SO8 FIFOs Memory applications.
- Address mapping
- Battery Charger
- Magnetic memories
- GPS Offender Tracking
- Product traceability
- Video Processing
- A/D output buffers
- Network bridges
- Analog-to-digital converters
- Controlled baseline
