72413L25SOG
| Parameters | |
|---|---|
| Bus Directional | Unidirectional |
| Retransmit Capability | No |
| Output Enable | YES |
| Cycle Time | 40 ns |
| Height Seated (Max) | 2.65mm |
| Length | 12.8mm |
| Width | 7.6mm |
| Thickness | 2.34mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 20 |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | FALL THRU 40NS |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 20 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Max Supply Current | 60mA |
| Clock Frequency | 25MHz |
| Access Time | 25 ns |
| Organization | 64X5 |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
72413L25SOG Overview
FIFO memory chip is included in the SOIC package.Memory IC's recommended mounted way is Surface Mount .If the supply voltage is set to 5V , high efficiency can be achieved.FIFO means contains 20 terminations.20 pin is used for operation.In order to operate FIFO design, a maximum current of 60mA is required.FIFO is recommended that the supply voltage be set to 5V for maximum efficiency.It is designed to run at a minimum temperature of 0°C degrees Celsius to ensure reliability.An operating temperature of 70°C °C is necessary for stable operation.In FIFOs , there is a self-contained gadget.The IC of the part is OTHER FIFO memory type.If the supply voltage is very low, such as 4.5V V, FIFO may be able to operate.There is a maximum supply voltage of 5.5V volts that FIFO memory can handle.Approximately 20 pins are attached to it.Normally, 5V power supplies are owned by the component.This gadget can also generate FALL THRU 40NS .In this FIFO memory IC, the clock runs at frequency 25MHz .
72413L25SOG Features
FIFOs category
Clock frequency of 25MHz
72413L25SOG Applications
There are a lot of Integrated Device Technology (IDT) 72413L25SOG FIFOs Memory applications.
- Consumer
- Industrial Systems
- Multimedia
- Signal processing
- Programmable Logic Controller
- Smart Meter
- Thermal Management for DDR3 Memory Modules
- Extended product life cycle
- Controlled baseline
- Multi-stage synchronizer
