72420L25TP
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mount | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 28 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Frequency | 40MHz |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 40mA |
| Max Supply Current | 40mA |
| Frequency (Max) | 40MHz |
| Access Time | 15 ns |
| Organization | 64X8 |
| Density | 512 b |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 8b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | No |
| Output Enable | YES |
| Cycle Time | 25 ns |
| Height Seated (Max) | 4.572mm |
| Length | 34.3mm |
| Width | 7.62mm |
| Thickness | 3.3mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72420L25TP Overview
PDIP is the package in which FIFO memory chip is contained.It is pointing in the direction of Through Hole .Supply voltages of 5V are capable of achieving high efficiency.As a result of this, FIFO means contains 28 terminations.28 pins are used for operation.In order for FIFO design to operate, a maximum current of 40mA is required.The supply voltage should be set to 5V in order to achieve FIFO's maximum efficiency.Keeping the temperature at 0°C degrees Celsius ensures its reliability.An operating temperature of 70°C °C is necessary for stable operation.FIFOs contains this gadget in its entirety.In this part, the memory type is OTHER FIFO .The FIFO memory chip may be operated at very low supply voltages, such as4.5V volts.There is a maximum supply voltage of 5.5V volts that FIFO memory can handle.There are a total of 28 pins on this FIFO memory IC.It is capable of maintaining good accuracy with a frequency of 40MHz .For regular operation, the memory logic's maximum value is 40MHz .Normally, the component owns 5V power supplies.
72420L25TP Features
FIFOs category
Frequency at most
72420L25TP Applications
There are a lot of Integrated Device Technology (IDT) 72420L25TP FIFOs Memory applications.
- Data-acquisition systems
- Data
- Multimedia
- SPI Bus Flash Memory Devices
- Battery Charger
- Programmable Logic Controller
- Emulators
- Laser Receiver System
- Seismic Data Collection at Extreme Temperatures
- Test site
