72421L10J
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 35mA |
| Max Supply Current | 35mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 64X9 |
| Density | 576 b |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 3.556mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72421L10J Overview
The PLCC package contains FIFO memory chip.It is recommended that memory IC be mounted in the Surface Mount direction.When the supply voltage is 5V , high efficiency is possible.FIFO means contains a total of 32 terminations.32 pins are used for operation.In order for FIFO design to operate, a maximum current of 35mA is required.A supply voltage of 5V is recommended for FIFO's maximum efficiency.This FIFO products runs at 0°C degrees Celsius at a minimum temperature to ensure reliability.70°C °C is the memory logic's maximum operating temperature that allows stable operation.This gadget is self-contained in?FIFOs .A OTHER FIFO type memory IC is present in the FIFO memory chip.FIFO may operate at very low supply voltages, such as 4.5V volts.A maximum supply voltage of 5.5V volts can be handled by the FIFO memory chip.It consists of a total of 32 pins.In the presence of a 100MHz frequency, it can maintain good accuracy.Regular operation has a FIFO memory's maximum value of 100MHz .It is normal for the component to own 5V power supplies.
72421L10J Features
FIFOs category
Frequency at most
72421L10J Applications
There are a lot of Integrated Device Technology (IDT) 72421L10J FIFOs Memory applications.
- Transistors
- PC peripheral
- Extended product life cycle
- One assembly
- Consumer
- SPI Bus Flash Memory Devices
- GPS Offender Tracking
- Buses
- Cameras
- Microprogramming
