72421L10PF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 32 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 100MHz |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 35mA |
| Max Supply Current | 35mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 64X9 |
| Density | 576 b |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 7mm |
| Width | 7mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72421L10PF Overview
FIFO memory chip is contained in the TQFP package.It is recommended that memory IC be mounted in the Surface Mount direction.An input voltage of 5V results in high efficiency.As a result of this, FIFO means contains 32 terminations.32 pins are the operation pins.In order to operate FIFO design, a maximum current of 35mA is required.When setting the supply voltage to 5V , you will achieve FIFO's maximum efficiency.For reliability, FIFO works at a minimum temperature of 0°C degrees Celsius.The stable operation is enabled by the memory logic's maximum operating temperature of 70°C °C.This gadget is self-contained in?FIFOs .A OTHER FIFO memory type IC is used in the part.If the supply voltage is very low, such as 4.5V V, FIFO may be able to operate.This FIFO memory chip can handle maximum supply voltages of 5.5V volts.The FIFO memory IC is equipped with a total of 32 pins.It is capable of maintaining good accuracy with a frequency of 100MHz .During regular operation, 100MHz is the FIFO memory's maximum value.There are normally 5V power supplies attached to the component.
72421L10PF Features
FIFOs category
Frequency at most
72421L10PF Applications
There are a lot of Integrated Device Technology (IDT) 72421L10PF FIFOs Memory applications.
- Consumer
- Character generators
- Signal processing
- Game Controller
- A/D output buffers
- Telecommunication
- Video Processing
- Magnetic memories
- Optical memories
- Battery Charger
