72421L15J
| Parameters | |
|---|---|
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 35mA |
| Max Supply Current | 35mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 64X9 |
| Density | 576 b |
| Standby Current-Max | 0.08A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 3.556mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
72421L15J Overview
You can find FIFO memory chip in the PLCC package.A Surface Mount mounting method is recommended.When the supply voltage is 5V , high efficiency is possible.In FIFO means, there are 32 terminations.32 pins are the operation pins.There is a maximum current requirement of 35mA for its operation.The supply voltage should be set to 5V in order to achieve FIFO's maximum efficiency.To ensure reliabilFIFOy, FIFO runs at a minimum working temperature of 0°C degrees Celsius.Its maximum operating temperature of 70°C °C ensures stable operation.The gadget in FIFOs is self-contained.There is a memory type OTHER FIFO in the IC of this part.It is possible to operate the FIFO memory chip at very low supply voltages, such as 4.5V volts.A maximum voltage of 5.5V volts can be applied to FIFO memory.As a result, it contains a total of 32 pins.When the frequency is set to 66.7MHz it can maintain good accuracy.During regular operation, 66.7MHz is the FIFO memory's maximum value.Normaly, the component is powered by 5V power supplies.
72421L15J Features
FIFOs category
Frequency at most
72421L15J Applications
There are a lot of Integrated Device Technology (IDT) 72421L15J FIFOs Memory applications.
- Network switching/routing
- High-speed graphics pixel buffer
- Video Processing
- Fabrication Site
- Desktop Computers
- Consumer
- Networking
- Code converters
- Data-acquisition systems
- Notebook
