72421L15PF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 32 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 66.7MHz |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 35mA |
| Max Supply Current | 35mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 64X9 |
| Density | 576 b |
| Standby Current-Max | 0.08A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 7mm |
| Width | 7mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72421L15PF Overview
TQFP is the package in which FIFO memory chip is contained.Mounting it Surface Mount is recommended.It is possible to achieve high efficiency with a supply voltage of 5V .A total of 32 terminations can be found in FIFO means.There are 32 pins for operation.For its operation, 35mA is the maximum current required.When setting the supply voltage to 5V , you will achieve FIFO's maximum efficiency.During operation, a minimum temperature of 0°C degrees Celsius should be maintained in order to ensure reliability.70°C °C is the memory logic's maximum operating temperature that allows stable operation.There is a self-contained gadget within FIFOs .A OTHER FIFO memory type IC is used in the part.If the supply voltage is very low, such as 4.5V V, FIFO may be able to operate.FIFO memory is capable of handling a maximum supply voltage of 5.5V volts.The FIFO memory IC is equipped with a total of 32 pins.A frequency of 66.7MHz is capable of maintaining good accuracy.During regular operation, the FIFO memory's maximum value is 66.7MHz .Components normally possess 5V power supplies.
72421L15PF Features
FIFOs category
Frequency at most
72421L15PF Applications
There are a lot of Integrated Device Technology (IDT) 72421L15PF FIFOs Memory applications.
- Disk Controllers
- Portable Information Devices
- Desktop Computers
- Consumer
- SPI Bus Flash Memory Devices
- Extended product life cycle
- General Data Collection Applications at Extreme High-Temperatures
- Battery Charger
- TVs
- Communications Systems
