Parameters |
Factory Lead Time |
1 Week |
Contact Plating |
Lead, Tin |
Mount |
Surface Mount |
Package / Case |
TQFP |
Number of Pins |
32 |
Published |
2005 |
Part Status |
Active |
Max Operating Temperature |
70°C |
Min Operating Temperature |
0°C |
Frequency |
66.7MHz |
Operating Supply Voltage |
5V |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
4.5V |
Element Configuration |
Dual |
Nominal Supply Current |
35mA |
Max Supply Current |
35mA |
Frequency (Max) |
66.7MHz |
Access Time |
10 ns |
Direction |
Unidirectional |
Density |
576 b |
Sync/Async |
Synchronous |
Word Size |
9b |
Bus Directional |
Unidirectional |
Retransmit Capability |
No |
FWFT Support |
No |
Programmable Flags Support |
Yes |
Length |
7mm |
Width |
7mm |
Thickness |
1.4mm |
RoHS Status |
RoHS Compliant |
Lead Free |
Contains Lead |
72421L15PF8 Overview
TQFP is the package in which FIFO memory chip is contained.Mounting it in Surface Mount is recommended.The operation pins are 32 pins.There is a maximum current requirement of 35mA for its operation.For FIFO's maximum efficiency, the supply voltage should be set to 5V .The FIFO products must be run at a minimum temperature of 0°C degrees Celsius to ensure reliability.By using a memory logic's maximum operating temperature of 70°C degrees Celsius, stable operation can be achieved.It is possible to operate the FIFO memory chip at very low supply voltages, such as 4.5V volts.FIFO memory is capable of handling a maximum supply voltage of 5.5V volts.It maintains good accuracy at a 66.7MHz frequency.Normally, the FIFO memory's maximum value is 66.7MHz .
72421L15PF8 Features
Frequency at most
72421L15PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72421L15PF8 FIFOs Memory applications.
- Medical Monitoring Device
- Computers
- Multi-stage synchronizer
- Network switching/routing
- SPI Bus Flash Memory Device
- Wireless
- A/D output buffers
- Data-acquisition systems
- Smart Meter
- Address mapping