72421L25J
| Parameters | |
|---|---|
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 25 ns |
| Height Seated (Max) | 3.556mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 35mA |
| Max Supply Current | 35mA |
| Frequency (Max) | 40MHz |
| Access Time | 15 ns |
| Organization | 64X9 |
| Density | 576 b |
| Standby Current-Max | 0.08A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
72421L25J Overview
PLCC is the package in which FIFO memory chip is contained.Mounting it Surface Mount is recommended.A supply voltage of 5V is capable of producing high efficiency.FIFO means contains 32 terminations.32 pin is used for operation.For its operation, 35mA is the maximum current required.When setting the supply voltage to 5V , you will achieve FIFO's maximum efficiency.To ensure reliabilFIFOy, FIFO runs at a minimum working temperature of 0°C degrees Celsius.A memory logic's maximum operating temperature of 70°C degrees Celsius assures stable operation.FIFOs contains this gadget in its entirety.The IC of the part is of the type OTHER FIFO .FIFO may operate at very low supply voltages, such as 4.5V volts.FIFO memory can handle a maximum supply voltage of 5.5V volts.The FIFO memory IC is equipped with a total of 32 pins.In the presence of a 40MHz frequency, it can maintain good accuracy.A FIFO memory's maximum value of 40MHz can be used for regular operation.Normally, the component owns 5V power supplies.
72421L25J Features
FIFOs category
Frequency at most
72421L25J Applications
There are a lot of Integrated Device Technology (IDT) 72421L25J FIFOs Memory applications.
- Tape controllers
- Test Equipment
- Rate buffers
- Network switching/routing
- Communications Systems
- Emulators
- Seismic Data Collection at Extreme Temperatures
- Video time base correction
- Cardiac Monitoring Device
- TVs
