72421L25J8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Packaging | Tape & Reel |
| Published | 2008 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 35mA |
| Max Supply Current | 35mA |
| Frequency (Max) | 40MHz |
| Access Time | 15 ns |
| Organization | 64X9 |
| Density | 576 b |
| Standby Current-Max | 0.08A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 25 ns |
| Height Seated (Max) | 3.556mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72421L25J8 Overview
The PLCC package contains FIFO memory chip.In terms of packaging, it comes in Tape & Reel cases.Surface Mount is memory IC's recommended mounting method.Supply voltages of 5V are capable of achieving high efficiency.As a result of this, FIFO means contains 32 terminations.In the case of the operation pins, they are 32 pins.Its maximum operating current is 35mA .FIFO is recommended that the supply voltage be set to 5V for maximum efficiency.In order to ensure reliability, FIFO is maintained at 0°C degrees Celsius at all times.70°C °C is the memory logic's maximum operating temperature that allows stable operation.It is self-contained in FIFOs .There is a memory type OTHER FIFO in the IC of this part.If the supply voltage is very low, such as 4.5V V, FIFO may be able to operate.A maximum voltage of 5.5V volts can be applied to FIFO memory.A total of 32 pins are present on the FIFO memory IC.In the presence of a 40MHz frequency, it can maintain good accuracy.There is 40MHz FIFO memory IC's maximum value for regular operation.Normally, the component owns 5V power supplies.
72421L25J8 Features
FIFOs category
Frequency at most
72421L25J8 Applications
There are a lot of Integrated Device Technology (IDT) 72421L25J8 FIFOs Memory applications.
- MP3 Interface for Automobile
- Programmable Logic Controller
- Cardiac Monitoring Device
- Queues for communication systems
- Down-Hole Energy Drilling
- Disk Controllers
- Consumer Systems
- Application that requires re-writable nonvolatile parameter memory
- Data
- Smart Meter
