72421L25PFI8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 32 |
| Packaging | Tape & Reel |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 40MHz |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 35mA |
| Max Supply Current | 35mA |
| Frequency (Max) | 40MHz |
| Access Time | 15 ns |
| Organization | 64X9 |
| Density | 576 b |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 25 ns |
| Height Seated (Max) | 1.6mm |
| Length | 7mm |
| Width | 7mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72421L25PFI8 Overview
FIFO memory chip is included in the TQFP package.You'll find it packaged in the shape of a Tape & Reel .Mounting it in the Surface Mount way is recommended.It is possible to achieve high efficiency with a supply voltage of 5V .I found that it has 32 terminations in FIFO means.FIFO design has 32 operation pins.The maximum current required for its operation is 35mA .In order to maximize efficiency, the supply voltage should be set to 5V .The FIFO products must be run at a minimum temperature of -40°C degrees Celsius to ensure reliability.As a result of having a maximum operating temperature of 85°C degrees Celsius, the unit is capable of exhibiting stable operation.This gadget is self-contained in?FIFOs .There is a memory type OTHER FIFO in the IC of this part.FIFO memory chips may be operated at very low supply voltages, such as 4.5V volts.This FIFO memory chip can handle maximum supply voltages of 5.5V volts.Approximately 32 pins are attached to it.When the frequency is set to 40MHz it can maintain good accuracy.The memory logic's maximum value is 40MHz for regular operation.Normally, the component owns 5V power supplies.
72421L25PFI8 Features
FIFOs category
Frequency at most
72421L25PFI8 Applications
There are a lot of Integrated Device Technology (IDT) 72421L25PFI8 FIFOs Memory applications.
- Seismic Data Collection at Extreme Temperatures
- Portable Information Devices
- SPI Bus Flash Memory Device
- Thermal Management for DDR3 Memory Modules
- Transistors
- Alarm System
- Computers
- Rate buffers
- GPS Offender Tracking
- High-speed disk
