72605L20J8
| Parameters | |
|---|---|
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 50MHz |
| Pin Count | 68 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 230mA |
| Max Supply Current | 230mA |
| Frequency (Max) | 50MHz |
| Access Time | 10 ns |
| Organization | 256X18 |
| Density | 9 kb |
| Standby Current-Max | 0.23A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | BI-DIRECTIONAL FIFO |
| Bus Directional | Bidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 20 ns |
| Height Seated (Max) | 4.572mm |
| Length | 24mm |
| Width | 24mm |
| Thickness | 3.63mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 68 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 68 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | 0°C |
| Additional Feature | BYPASS REGISTER |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
72605L20J8 Overview
FIFO memory chip is included in the PLCC package.A Surface Mount mounting method is recommended.When the supply voltage is 5V , high efficiency is possible.FIFO means contains 68 terminations.The operation pins are 68 pins.FIFO design requires a maximum current of 230mA to operate.A voltage of 5V should be used for FIFO's maximum efficiency.Keeping the temperature at 0°C degrees Celsius ensures its reliability.As a result of having a maximum operating temperature of 85°C degrees Celsius, the unit is capable of exhibiting stable operation.In FIFOs , this gadget is self-contained.This part is equipped with an IC of type BI-DIRECTIONAL FIFO memory.There is a possibility that FIFO may operate at a very low supply voltage, such as 4.5V V.The memory logic's maximum supply voltage is 5.5V volts.Approximately 68 pins are attached to it.With a frequency of 50MHz , it exhibits good accuracy.It is recommended that the FIFO memory's maximum value be set to 50MHz .Normally, the component owns 5V power supplies.It is also possible to generate BYPASS REGISTER using this FIFO memory.
72605L20J8 Features
FIFOs category
Frequency at most
72605L20J8 Applications
There are a lot of Integrated Device Technology (IDT) 72605L20J8 FIFOs Memory applications.
- Test site
- Alarm System
- Portable Information Devices
- Data communications
- Temporary storage elements
- Switches
- Communications
- Event Recorder
- Laser Receiver System
- Application that requires re-writable nonvolatile parameter memory
