72605L25PF8
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Packaging | Tape & Reel |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | 0°C |
| Additional Feature | BYPASS REGISTER |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 230mA |
| Max Supply Current | 230mA |
| Frequency (Max) | 40MHz |
| Access Time | 15 ns |
| Organization | 256X18 |
| Density | 9 kb |
| Standby Current-Max | 0.23A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | BI-DIRECTIONAL FIFO |
| Bus Directional | Bidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 25 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72605L25PF8 Overview
The TQFP package contains FIFO memory chip.It comes in a Tape & Reel package.Surface Mount is recommended as the mounting method.A supply voltage of 5V is capable of producing high efficiency.I found that it has 64 terminations in FIFO means.There are 64 pins on the operation pins.In order for FIFO design to operate, a maximum current of 230mA is required.Set the supply voltage to 5V to ensure FIFO's maximum efficiency.To ensure reliabilFIFOy, FIFO runs at a minimum working temperature of 0°C degrees Celsius.By operating at 85°C degrees Celsius, this FIFO products is able to maintain a stable operation.It is contained within FIFOs .The IC of the part is of the type BI-DIRECTIONAL FIFO .Low supply voltages, such as 4.5V V, may be required for operation.FIFO memory is capable of handling a maximum supply voltage of 5.5V volts.A total of 64 pins are present on the FIFO memory IC.A frequency of 40MHz is capable of maintaining good accuracy.It is recommended that the FIFO memory's maximum value be set to 40MHz .Normally, the component owns 5V power supplies.It is also possible to generate BYPASS REGISTER by using this FIFO memory.
72605L25PF8 Features
FIFOs category
Frequency at most
72605L25PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72605L25PF8 FIFOs Memory applications.
- HDD
- Look-up Tables
- Consumer
- Queues for communication systems
- Network switching/routing
- Game Consoles
- Extended product-change notification
- Magnetic memories
- IP Radio
- Video
