72605L35J
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 68 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 68 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | 0°C |
| Additional Feature | BYPASS REGISTER |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 28MHz |
| Pin Count | 68 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 230mA |
| Max Supply Current | 230mA |
| Frequency (Max) | 28MHz |
| Access Time | 21 ns |
| Organization | 256X18 |
| Density | 9 kb |
| Standby Current-Max | 0.23A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | BI-DIRECTIONAL FIFO |
| Bus Directional | Bidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 35 ns |
| Height Seated (Max) | 4.572mm |
| Length | 24mm |
| Width | 24mm |
| Thickness | 3.63mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72605L35J Overview
The PLCC package contains FIFO memory chip.Mounting it in the Surface Mount way is recommended.When the supply voltage is 5V , high efficiency is possible.As a result of this, FIFO means contains 68 terminations.In the case of the operation pins, they are 68 pins.FIFO requires a minimum of 230mA current to operate.When the supply voltage is set to 5V , the FIFO's maximum efficiency is achieved.At a minimum working temperature of 0°C degrees Celsius, FIFO is guaranteed to operate reliably.As a result of having a maximum operating temperature of 85°C degrees Celsius, the unit is capable of exhibiting stable operation.The gadget in FIFOs is self-contained.The IC of the part is of the type BI-DIRECTIONAL FIFO .Typically, FIFO would work at 4.5V volts, but it may also work at higher voltages.FIFO memory can handle a maximum supply voltage of 5.5V V.This FIFO memory IC is equipped with 68 pins in total.With a frequency of 28MHz , it exhibits good accuracy.It is recommended that the FIFO memory's maximum value be set to 28MHz .Normally, the component owns 5V power supplies.It is also possible to generate BYPASS REGISTER with the use of this FIFO memory.
72605L35J Features
FIFOs category
Frequency at most
72605L35J Applications
There are a lot of Integrated Device Technology (IDT) 72605L35J FIFOs Memory applications.
- Consumer Systems
- HDD
- Multimedia
- A/D output buffers
- Network bridges
- General Data Collection Applications at Extreme High-Temperatures
- Networking
- Test site
- Firmware loaders
- Optical memories
