72605L35PF
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | 0°C |
| Additional Feature | BYPASS REGISTER |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 28MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 230mA |
| Max Supply Current | 230mA |
| Frequency (Max) | 28MHz |
| Access Time | 21 ns |
| Organization | 256X18 |
| Density | 9 kb |
| Standby Current-Max | 0.23A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | BI-DIRECTIONAL FIFO |
| Bus Directional | Bidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 35 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72605L35PF Overview
FIFO memory chip can be found in the TQFP package.Mounting it in the Surface Mount way is recommended.It is possible to achieve high efficiency with a supply voltage of 5V .FIFO means contains 64 terminations.As far as the operation pins are concerned, they are 64 pins.Its maximum operating current is 230mA .In order to maximize efficiency, the supply voltage should be set to 5V .It operates at 0°C degrees Celsius to ensure reliability.As a result of having a maximum operating temperature of 85°C degrees Celsius, the unit is capable of exhibiting stable operation.It is self-contained in FIFOs .ICs of type BI-DIRECTIONAL FIFO are used in the FIFO memory chip.FIFO may operate at very low supply voltages, such as 4.5V volts.FIFO memory is capable of handling a maximum supply voltage of 5.5V volts.This FIFO memory IC is equipped with 64 pins in total.When the frequency is set to 28MHz it can maintain good accuracy.There is 28MHz FIFO memory IC's maximum value for regular operation.Normally, the component owns 5V power supplies.Additionally, BYPASS REGISTER can be generated with this FIFO memory.
72605L35PF Features
FIFOs category
Frequency at most
72605L35PF Applications
There are a lot of Integrated Device Technology (IDT) 72605L35PF FIFOs Memory applications.
- High-speed disk
- Routers
- General Data Collection Applications at Low-Temperatures
- High-speed graphics pixel buffer
- Communications Systems
- Rate buffers
- IP Radio
- Communications
- Product traceability
- Test Equipment
