72605L50J8
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 68 |
| Packaging | Tape & Reel |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 68 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | 0°C |
| Additional Feature | BYPASS REGISTER |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 20MHz |
| Pin Count | 68 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 230mA |
| Max Supply Current | 230mA |
| Frequency (Max) | 20MHz |
| Access Time | 25 ns |
| Organization | 256X18 |
| Density | 9 kb |
| Standby Current-Max | 0.23A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | BI-DIRECTIONAL FIFO |
| Bus Directional | Bidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 50 ns |
| Height Seated (Max) | 4.572mm |
| Length | 24mm |
| Width | 24mm |
| Thickness | 3.63mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72605L50J8 Overview
You will find FIFO memory chip in the PLCC package.In terms of packaging, it comes in Tape & Reel cases.The recommended mounting method for this FIFO products is Surface Mount .When the supply voltage is 5V , high efficiency is possible.A total of 68 terminations can be found in FIFO means.As far as the operation pins are concerned, they are 68 pins.FIFO requires a minimum of 230mA current to operate.A 5V supply voltage will ensure FIFO's maximum efficiency.Keeping the temperature at 0°C degrees Celsius ensures its reliability.By operating at 85°C degrees Celsius, this FIFO products is able to maintain a stable operation.The gadget in FIFOs is self-contained.The IC of the part is of the type BI-DIRECTIONAL FIFO .FIFO may operate at very low supply voltages, such as 4.5V volts.The FIFO memory chip is capable of handling maximum supply voltages of 5.5V volts.This FIFO memory IC is equipped with 68 pins in total.A frequency of 20MHz is sufficient to maintain good accuracy.During normal operation, the FIFO memory's maximum value is 20MHz .In normal circumstances, the component has 5V power supplies.This gadget can also generate BYPASS REGISTER .
72605L50J8 Features
FIFOs category
Frequency at most
72605L50J8 Applications
There are a lot of Integrated Device Technology (IDT) 72605L50J8 FIFOs Memory applications.
- Controlled baseline
- Network switching/routing
- Routers
- Wireless
- Data
- Test Equipment
- Communications
- Application that requires re-writable nonvolatile parameter memory
- Medical Monitoring Device
- Signal processing
