72605L50PF8
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Packaging | Tape & Reel |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | 0°C |
| Additional Feature | BYPASS REGISTER |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 230mA |
| Max Supply Current | 230mA |
| Frequency (Max) | 20MHz |
| Access Time | 25 ns |
| Organization | 256X18 |
| Density | 9 kb |
| Standby Current-Max | 0.23A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | BI-DIRECTIONAL FIFO |
| Bus Directional | Bidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 50 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72605L50PF8 Overview
TQFP is a package that contains FIFO memory chip.Tape & Reel case is used for packaging.Mounting it Surface Mount is recommended.When the supply voltage is 5V , high efficiency is possible.FIFO means contains 64 terminations.There are 64 pins for operation.FIFO design requires a maximum current of 230mA to operate.The supply voltage should be set to 5V in order to achieve FIFO's maximum efficiency.The FIFO products must be run at a minimum temperature of 0°C degrees Celsius to ensure reliability.Keeping the operating temperature at 85°C °C allows the FIFO products to operate continuously.It is contained within FIFOs .It has a type BI-DIRECTIONAL FIFO memory IC.The FIFO memory chip may be operated at very low supply voltages, such as4.5V volts.A maximum voltage of 5.5V volts can be applied to FIFO memory.Approximately 64 pins are attached to it.When the frequency is set to 20MHz it can maintain good accuracy.During regular operation, 20MHz is the FIFO memory's maximum value.Normally, the component owns 5V power supplies.Using this gadget, BYPASS REGISTER can also be generated.
72605L50PF8 Features
FIFOs category
Frequency at most
72605L50PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72605L50PF8 FIFOs Memory applications.
- Disk Controllers
- Desktop Computers
- One assembly
- Test Equipment
- Communications Systems
- High-speed graphics pixel buffer
- Data
- Down-Hole Energy Drilling
- Portable Information Devices
- Switches
