72615L20J8
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 68 |
| Packaging | Tape & Reel |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 68 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | 0°C |
| Additional Feature | BYPASS REGISTER |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 50MHz |
| Pin Count | 68 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 230mA |
| Max Supply Current | 230mA |
| Frequency (Max) | 50MHz |
| Access Time | 10 ns |
| Organization | 512X18 |
| Density | 18 kb |
| Standby Current-Max | 0.23A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | BI-DIRECTIONAL FIFO |
| Bus Directional | Bidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 20 ns |
| Height Seated (Max) | 4.572mm |
| Length | 24mm |
| Width | 24mm |
| Thickness | 3.63mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72615L20J8 Overview
PLCC is a package that contains FIFO memory chip.It's packaged in the shape of a Tape & Reel .A Surface Mount mounting method is recommended.High efficiency is possible with a supply voltage of 5V .I found that it has 68 terminations in FIFO means.Operation pins are 68 .The maximum current required for its operation is 230mA .Set the supply voltage to 5V to ensure FIFO's maximum efficiency.Keeping the temperature at 0°C degrees Celsius ensures its reliability.By using a memory logic's maximum operating temperature of 85°C degrees Celsius, stable operation can be achieved.It is contained within FIFOs .This part has a memory type of BI-DIRECTIONAL FIFO .Typically, FIFO would work at 4.5V volts, but it may also work at higher voltages.A maximum supply voltage of 5.5V V can be handled by this FIFO memory chip.Currently, it has 68 pins.It is capable of maintaining good accuracy with a frequency of 50MHz .Normally, the FIFO memory's maximum value is 50MHz .Normally, 5V power supplies are owned by the component.It is also possible to generate BYPASS REGISTER using this FIFO memory.
72615L20J8 Features
FIFOs category
Frequency at most
72615L20J8 Applications
There are a lot of Integrated Device Technology (IDT) 72615L20J8 FIFOs Memory applications.
- SPI Bus Flash Memory Device
- Queues for communication systems
- Extended product life cycle
- Smart Meter
- Down-Hole Energy Drilling
- HDD
- Fabrication Site
- Video time base correction
- IP Radio
- Battery Charger
