72615L25J
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 68 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 68 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | 0°C |
| Additional Feature | BYPASS REGISTER |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 40MHz |
| Pin Count | 68 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 230mA |
| Max Supply Current | 230mA |
| Frequency (Max) | 40MHz |
| Access Time | 15 ns |
| Organization | 512X18 |
| Density | 18 kb |
| Standby Current-Max | 0.23A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | BI-DIRECTIONAL FIFO |
| Bus Directional | Bidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 25 ns |
| Height Seated (Max) | 4.572mm |
| Length | 24mm |
| Width | 24mm |
| Thickness | 3.63mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72615L25J Overview
FIFO memory chip is contained in the PLCC package.Mounting it in Surface Mount is recommended.High efficiency is possible with a supply voltage of 5V .As a result of this, FIFO means contains 68 terminations.FIFO design has 68 operation pins.Its maximum operating current is 230mA .FIFO is recommended that the supply voltage be set to 5V for maximum efficiency.It is designed to run at a minimum temperature of 0°C degrees Celsius to ensure reliability.As a result of having a maximum operating temperature of 85°C degrees Celsius, the unit is capable of exhibiting stable operation.In FIFOs , this gadget is self-contained.It has a BI-DIRECTIONAL FIFO memory type IC.Typically, FIFO would work at 4.5V volts, but it may also work at higher voltages.A maximum voltage of 5.5V volts can be applied to FIFO memory.It has a total of 68 pins on it.In the presence of a 40MHz frequency, it can maintain good accuracy.Regular operation has a FIFO memory's maximum value of 40MHz .Normally, 5V power supplies are owned by the component.It is also possible to generate BYPASS REGISTER with the use of this FIFO memory.
72615L25J Features
FIFOs category
Frequency at most
72615L25J Applications
There are a lot of Integrated Device Technology (IDT) 72615L25J FIFOs Memory applications.
- Battery Charger
- Video Processing
- Digital buffering
- Video time base correction
- Notebook
- Optical memories
- Firmware loaders
- High-speed disk
- Game Controller
- Desktop Computers
