72615L35PF
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | 0°C |
| Additional Feature | BYPASS REGISTER |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 28MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 230mA |
| Max Supply Current | 230mA |
| Frequency (Max) | 28MHz |
| Access Time | 21 ns |
| Organization | 512X18 |
| Density | 18 kb |
| Standby Current-Max | 0.23A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | BI-DIRECTIONAL FIFO |
| Bus Directional | Bidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 35 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72615L35PF Overview
FIFO memory chip is contained in the TQFP package.Mounting it in Surface Mount is recommended.It is possible to achieve high efficiency with a supply voltage of 5V .As a result of this, FIFO means contains 64 terminations.FIFO design has 64 operation pins.FIFO design requires 230mA amps of current to operate.A 5V supply voltage will ensure FIFO's maximum efficiency.FIFO operates at a minimum temperature of 0°C degrees Celsius to ensure reliabilFIFOy.The stable operation is enabled by the memory logic's maximum operating temperature of 85°C °C.There is a self-contained gadget within FIFOs .This part has a memory type of BI-DIRECTIONAL FIFO .It is possible to operate the FIFO memory chip at very low supply voltages, such as 4.5V volts.An input voltage of 5.5V V is the maximum that FIFO memory can handle.It consists of a total of 64 pins.It maintains good accuracy at a 28MHz frequency.The memory logic's maximum value is 28MHz for regular operation.A component normally has 5V power supplies attached to it.The gadget can also generate a value of BYPASS REGISTER .
72615L35PF Features
FIFOs category
Frequency at most
72615L35PF Applications
There are a lot of Integrated Device Technology (IDT) 72615L35PF FIFOs Memory applications.
- Consumer
- Measurement Equipment
- TVs
- Programmable Logic Controller
- Down-Hole Energy Drilling
- Smart Meter
- SPD for DDR3 Memory Modules
- PC peripheral
- Portable Information Devices
- Networking
