72615L50PF8
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Packaging | Tape & Reel |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | 0°C |
| Additional Feature | BYPASS REGISTER |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 230mA |
| Max Supply Current | 230mA |
| Frequency (Max) | 20MHz |
| Access Time | 25 ns |
| Organization | 512X18 |
| Density | 18 kb |
| Standby Current-Max | 0.23A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | BI-DIRECTIONAL FIFO |
| Bus Directional | Bidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 50 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72615L50PF8 Overview
FIFO memory chip is included in the TQFP package.Tape & Reel case is used for packaging.A Surface Mount mounting method is recommended.If the supply voltage is set to 5V , high efficiency can be achieved.In FIFO means, there are 64 terminations.Operation pins are 64 .There is a maximum current requirement of 230mA for its operation.FIFO is recommended that the supply voltage be set to 5V for maximum efficiency.During operation, a minimum temperature of 0°C degrees Celsius should be maintained in order to ensure reliability.An operating temperature of 85°C °C is necessary for stable operation.In FIFOs , there is a self-contained gadget.ICs of type BI-DIRECTIONAL FIFO are used in the FIFO memory chip.There is a possibility that FIFO may operate at a very low supply voltage, such as 4.5V V.A maximum voltage of 5.5V volts can be applied to FIFO memory.There are a total of 64 pins on this FIFO memory IC.When the frequency is set to 20MHz it can maintain good accuracy.It is recommended that the FIFO memory's maximum value be set to 20MHz .In normal circumstances, the component has 5V power supplies.With the help of this FIFO memory, BYPASS REGISTER can also be generated.
72615L50PF8 Features
FIFOs category
Frequency at most
72615L50PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72615L50PF8 FIFOs Memory applications.
- General Data Collection Applications at Low-Temperatures
- Character generators
- Look-up Tables
- Cameras
- Network switching/routing
- SPD for DDR3 Memory Modules
- Thermal Management for DDR3 Memory Modules
- Switches
- Programmable Logic Controller
- Wireless
