72801L10PF
| Parameters | |
|---|---|
| Access Time | 6.5 ns |
| Data Bus Width | 9b |
| Organization | 256X9 |
| Density | 4.5 kb |
| Standby Current-Max | 0.01A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 100MHz |
72801L10PF Overview
This package is included in TQFP .Surface Mount is recommended as the mounting method.When the supply voltage is 5V , high efficiency is possible.A total of 64 terminations are contained within FIFO means.In the case of the operation pins, they are 64 pins.Its maximum operating current is 60mA .A voltage of 5V should be used for FIFO's maximum efficiency.For reliability, FIFO works at a minimum temperature of 0°C degrees Celsius.A memory logic's maximum operating temperature of 70°C degrees Celsius assures stable operation.There is a self-contained gadget within FIFOs .A OTHER FIFO memory type IC is used in the part.Typically, FIFO would work at 4.5V volts, but it may also work at higher voltages.A maximum voltage of 5.5V volts can be applied to FIFO memory.The FIFO memory IC has a total of 64 pins.When the frequency is set to 100MHz , the system can maintain good accuracy.During regular operation, 100MHz is the FIFO memory's maximum value.It is normal for a component to be equipped with 5V power supplies.
72801L10PF Features
FIFOs category
Frequency at most
72801L10PF Applications
There are a lot of Integrated Device Technology (IDT) 72801L10PF FIFOs Memory applications.
- Consumer Systems
- TVs
- Event Recorder
- General Data Collection Applications at Extreme High-Temperatures
- Telecommunication
- Disk Controllers
- Communications Systems
- Computer networks
- Temporary storage elements
- HDD
