72801L10PFG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2013 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 64 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Number of Circuits | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Data Bus Width | 9b |
| Density | 4.5 kb |
| Standby Current-Max | 0.01A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
72801L10PFG Overview
You can find FIFO memory chip in the TQFP package.Memory IC's recommended mounted way is Surface Mount .An input voltage of 5V results in high efficiency.64 terminations are contained in FIFO means.These are the 64 pins for operation.Its maximum operating current is 60mA .The supply voltage should be set to 5V in order to achieve FIFO's maximum efficiency.At a minimum working temperature of 0°C degrees Celsius, FIFO is guaranteed to operate reliably.As a result of having a maximum operating temperature of 70°C degrees Celsius, the unit is capable of exhibiting stable operation.FIFOs contains this gadget in its entirety.There is a memory type OTHER FIFO in the IC of this part.There is a possibility that FIFO may operate at a very low supply voltage, such as 4.5V V.A maximum voltage of 5.5V volts can be applied to FIFO memory.It has a total of 64 pins on it.A frequency of 100MHz is sufficient to maintain good accuracy.100MHz is the FIFO memory IC's maximum value for regular operation.It is normal for a component to be equipped with 5V power supplies.By using 2 circuits, FIFO memory chip achieves enhanced flexibility.
72801L10PFG Features
FIFOs category
Frequency at most
72801L10PFG Applications
There are a lot of Integrated Device Technology (IDT) 72801L10PFG FIFOs Memory applications.
- Look-up Tables
- Optical memories
- Event Recorder
- Fabrication Site
- SPD for DDR3 Memory Modules
- IP Radio
- Multi-stage synchronizer
- Extended product life cycle
- Desktop Computers
- General Data Collection Applications at Low-Temperatures
