72801L10TF8
| Parameters | |
|---|---|
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 256X9 |
| Density | 4.5 kb |
| Standby Current-Max | 0.01A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 64 |
| Packaging | Tape & Reel |
72801L10TF8 Overview
The LQFP package contains FIFO memory chip.You'll find it packaged in the shape of a Tape & Reel .A Surface Mount mounting method is recommended.When the supply voltage is 5V there is the possibility of high efficiency.I found that it has 64 terminations in FIFO means.Operation pins are 64 .FIFO requires a minimum of 60mA current to operate.For FIFO's maximum efficiency, the supply voltage should be set to 5V .To ensure reliabilFIFOy, FIFO runs at a minimum working temperature of 0°C degrees Celsius.As a result of having a maximum operating temperature of 70°C degrees Celsius, the unit is capable of exhibiting stable operation.It is self-contained in FIFOs .It has a OTHER FIFO memory type IC.FIFO may operate at a very low supply voltage, such as 4.5V V.An input voltage of 5.5V V is the maximum that FIFO memory can handle.The FIFO memory IC is equipped with a total of 64 pins.A frequency of 100MHz is capable of maintaining good accuracy.It is recommended that the FIFO memory's maximum value be set to 100MHz .A component normally has 5V power supplies attached to it.
72801L10TF8 Features
FIFOs category
Frequency at most
72801L10TF8 Applications
There are a lot of Integrated Device Technology (IDT) 72801L10TF8 FIFOs Memory applications.
- Network bridges
- Microprogramming
- Data communications
- Programmable Logic Controller
- PC peripheral
- Temporary storage elements
- Rate buffers
- Portable Information Devices
- Emulators
- Controlled baseline
