72801L15PF
| Parameters | |
|---|---|
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Data Bus Width | 9b |
| Organization | 256X9 |
| Density | 4.5 kb |
| Standby Current-Max | 0.01A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
72801L15PF Overview
You can find FIFO memory chip in the TQFP package.It is pointing in the direction of Surface Mount .When the supply voltage is 5V there is the possibility of high efficiency.A total of 64 terminations are contained within FIFO means.As far as the operation pins are concerned, they are 64 pins.FIFO design requires 60mA amps of current to operate.When setting the supply voltage to 5V , you will achieve FIFO's maximum efficiency.During operation, a minimum temperature of 0°C degrees Celsius should be maintained in order to ensure reliability.By operating at a temperature of 70°C °C, the FIFO products is capable of stable operation.A self-contained gadget is contained within FIFOs .In this part, the memory type is OTHER FIFO .In some cases, FIFO operates at a very low supply voltage, such as 4.5V V.This FIFO memory chip can handle maximum supply voltages of 5.5V volts.Approximately 64 pins are attached to it.With a frequency of 66.7MHz , it exhibits good accuracy.66.7MHz is the FIFO memory IC's maximum value for regular operation.There are normally 5V power supplies attached to the component.
72801L15PF Features
FIFOs category
Frequency at most
72801L15PF Applications
There are a lot of Integrated Device Technology (IDT) 72801L15PF FIFOs Memory applications.
- Portable Information Devices
- Desktop Computers
- Rate buffers
- TVs
- Look-up Tables
- Test site
- Queues for communication systems
- Industrial Systems
- Product traceability
- Medical Monitoring Device
