72801L15PF8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 256X9 |
| Density | 4.5 kb |
| Standby Current-Max | 0.01A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72801L15PF8 Overview
FIFO memory chip is included in the TQFP package.It is pointing in the direction of Surface Mount .When the supply voltage is 5V , high efficiency is possible.FIFO means contains 64 terminations.64 pin is used for operation.There is a maximum current requirement of 60mA for its operation.In order to maximize efficiency, the supply voltage should be set to 5V .At a minimum working temperature of 0°C degrees Celsius, FIFO is guaranteed to operate reliably.An operating temperature of 70°C °C is necessary for stable operation.It is contained within FIFOs .It has a OTHER FIFO memory type IC.FIFO memory chips may be operated at very low supply voltages, such as 4.5V volts.FIFO memory can handle a maximum supply voltage of 5.5V volts.Currently, it has 64 pins.A frequency of 66.7MHz is capable of maintaining good accuracy.There is 66.7MHz FIFO memory IC's maximum value for regular operation.Normaly, the component is powered by 5V power supplies.
72801L15PF8 Features
FIFOs category
Frequency at most
72801L15PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72801L15PF8 FIFOs Memory applications.
- Smart Meter
- Address mapping
- Communications
- Medical Monitoring Device
- Consumer
- PC peripheral
- Queues for communication systems
- Event Recorder
- Down-Hole Energy Drilling
- Rate buffers
