72801L15PFI
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 256X9 |
| Density | 4.5 kb |
| Standby Current-Max | 0.01A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72801L15PFI Overview
You can find FIFO memory chip in package TQFP .Surface Mount is memory IC's recommended mounting method.It is possible to achieve high efficiency with a supply voltage of 5V .FIFO means contains 64 terminations.In the case of the operation pins, they are 64 pins.In order for FIFO design to operate, FIFO design requires a maximum current of 60mA .The supply voltage should be set to 5V in order to achieve FIFO's maximum efficiency.FIFO operates at a minimum temperature of -40°C degrees Celsius to ensure reliabilFIFOy.The memory logic's maximum operating temperature is 85°C °C, which allows for stable operation.A self-contained gadget is contained in FIFOs .It has a OTHER FIFO memory type IC.There is a possibility that FIFO may operate at a very low supply voltage, such as 4.5V V.The FIFO memory chip is capable of handling maximum supply voltages of 5.5V volts.As a result, it contains a total of 64 pins.When the frequency is set to 66.7MHz it can maintain good accuracy.Regular operation has a FIFO memory's maximum value of 66.7MHz .Components normally possess 5V power supplies.
72801L15PFI Features
FIFOs category
Frequency at most
72801L15PFI Applications
There are a lot of Integrated Device Technology (IDT) 72801L15PFI FIFOs Memory applications.
- Product traceability
- Notebook
- Cardiac Monitoring Device
- Measurement Equipment
- MP3 Interface for Automobile
- Video Processing
- Data
- Test Equipment
- SPI Bus Flash Memory Devices
- Video time base correction
