72801L15PFI8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 256X9 |
| Density | 4.5 kb |
| Standby Current-Max | 0.01A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72801L15PFI8 Overview
The TQFP package contains FIFO memory chip.It is pointing in the direction of Surface Mount .When the supply voltage is 5V , high efficiency is possible.I found that it has 64 terminations in FIFO means.64 pins are used for operation.Its maximum operating current is 60mA .The supply voltage should be set to 5V in order to achieve FIFO's maximum efficiency.Keeping the temperature at -40°C degrees Celsius ensures its reliability.Keeping the operating temperature at 85°C °C allows the FIFO products to operate continuously.It is contained within FIFOs .It has a OTHER FIFO memory type IC.The FIFO memory chip may be operated at very low supply voltages, such as4.5V volts.An input voltage of 5.5V V is the maximum that FIFO memory can handle.There are a total of 64 pins on this FIFO memory IC.A frequency of 66.7MHz is capable of maintaining good accuracy.66.7MHz is the FIFO memory IC's maximum value for regular operation.A component normally has 5V power supplies attached to it.
72801L15PFI8 Features
FIFOs category
Frequency at most
72801L15PFI8 Applications
There are a lot of Integrated Device Technology (IDT) 72801L15PFI8 FIFOs Memory applications.
- Portable Information Devices
- Test site
- Video time base correction
- Networking
- Battery Charger
- Communications
- Data communications
- Computers
- Multi-stage synchronizer
- Telecommunication
