72801L15TF8
| Parameters | |
|---|---|
| Number of Pins | 64 |
| Packaging | Tape & Reel |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 256X9 |
| Density | 4.5 kb |
| Standby Current-Max | 0.01A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
72801L15TF8 Overview
FIFO memory chip is contained in the LQFP package.It comes in a Tape & Reel package.Mounting it Surface Mount is recommended.If the supply voltage is set to 5V , high efficiency can be achieved.FIFO means contains a total of 64 terminations.64 pins are used for operation.For its operation, 60mA is the maximum current required.When setting the supply voltage to 5V , you will achieve FIFO's maximum efficiency.It is designed to run at a minimum temperature of 0°C degrees Celsius to ensure reliability.70°C °C is the memory logic's maximum operating temperature that allows stable operation.This gadget is self-contained in?FIFOs .There is a memory type OTHER FIFO in the IC of this part.FIFO memory chips may be operated at very low supply voltages, such as 4.5V volts.A maximum voltage of 5.5V volts can be applied to FIFO memory.The FIFO memory IC has a total of 64 pins.Despite a frequency of 66.7MHz , it is capable of maintaining good accuracy.For regular operation, the memory logic's maximum value is 66.7MHz .It is normal for the component to own 5V power supplies.
72801L15TF8 Features
FIFOs category
Frequency at most
72801L15TF8 Applications
There are a lot of Integrated Device Technology (IDT) 72801L15TF8 FIFOs Memory applications.
- Consumer
- SPD for DDR3 Memory Modules
- Computer networks
- Consumer Systems
- Fabrication Site
- TVs
- Analog-to-digital converters
- IP Camera Buffer
- Test Equipment
- Communications Systems
