72801L25PF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 40MHz |
| Access Time | 15 ns |
| Organization | 256X9 |
| Density | 4.5 kb |
| Standby Current-Max | 0.01A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 25 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72801L25PF Overview
The TQFP package contains FIFO memory chip.The recommended mounting way is Surface Mount .A supply voltage of 5V allows for high efficiency.FIFO means contains a total of 64 terminations.FIFO design has 64 operation pins.In order for FIFO design to operate, FIFO design requires a maximum current of 60mA .A supply voltage of 5V is recommended for FIFO's maximum efficiency.Keeping the temperature at 0°C degrees Celsius ensures its reliability.By using a memory logic's maximum operating temperature of 70°C degrees Celsius, stable operation can be achieved.A self-contained gadget is contained in FIFOs .In this part, the memory type is OTHER FIFO .There is a possibility that FIFO can operate at very low supply voltages, such as 4.5V V.A maximum supply voltage of 5.5V V can be handled by this FIFO memory chip.The FIFO memory IC is equipped with a total of 64 pins.In spite of the frequency 40MHz , it is capable of maintaining a good level of accuracy.During regular operation, the FIFO memory's maximum value is 40MHz .In normal circumstances, the component has 5V power supplies.
72801L25PF Features
FIFOs category
Frequency at most
72801L25PF Applications
There are a lot of Integrated Device Technology (IDT) 72801L25PF FIFOs Memory applications.
- Multimedia
- Product traceability
- Desktop Computers
- Extended product life cycle
- Address mapping
- Portable Information Devices
- Rate buffers
- Disk Controllers
- SPD for DDR3 Memory Modules
- Queues for communication systems
