72801L25PFI
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 40MHz |
| Access Time | 15 ns |
| Organization | 256X9 |
| Density | 4.5 kb |
| Standby Current-Max | 0.01A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 25 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72801L25PFI Overview
TQFP is a package that contains FIFO memory chip.The recommended mounting way is Surface Mount .High efficiency is possible with a supply voltage of 5V .In FIFO means, there are 64 terminations.These are the 64 pins for operation.FIFO design requires a maximum current of 60mA to operate.A supply voltage of 5V is recommended for FIFO's maximum efficiency.At a minimum working temperature of -40°C degrees Celsius, FIFO is guaranteed to operate reliably.By operating at 85°C degrees Celsius, this FIFO products is able to maintain a stable operation.The gadget in FIFOs is self-contained.In this part, the memory type is OTHER FIFO .The FIFO memory chip may be operated at very low supply voltages, such as4.5V volts.An input voltage of 5.5V V is the maximum that FIFO memory can handle.Approximately 64 pins are attached to it.Despite a frequency of 40MHz , it is capable of maintaining good accuracy.For regular operation, the memory logic's maximum value is 40MHz .Normally, 5V power supplies are owned by the component.
72801L25PFI Features
FIFOs category
Frequency at most
72801L25PFI Applications
There are a lot of Integrated Device Technology (IDT) 72801L25PFI FIFOs Memory applications.
- Game Consoles
- Cameras
- High-speed disk
- Desktop Computers
- Battery Charger
- Down-Hole Energy Drilling
- Portable Information Devices
- PC peripheral
- Routers
- Transistors
