72801L25PFI8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2013 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 40MHz |
| Access Time | 15 ns |
| Organization | 256X9 |
| Density | 4.5 kb |
| Standby Current-Max | 0.01A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 25 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72801L25PFI8 Overview
The TQFP package contains FIFO memory chip.Mounting it Surface Mount is recommended.When the supply voltage is 5V there is the possibility of high efficiency.In FIFO means, there are 64 terminations.64 pin is used for operation.FIFO design requires 60mA amps of current to operate.A 5V supply voltage will ensure FIFO's maximum efficiency.It operates at -40°C degrees Celsius to ensure reliability.85°C °C is the memory logic's maximum operating temperature that allows stable operation.FIFOs contains this gadget in its entirety.The IC of the part is of the type OTHER FIFO .There is a possibility that FIFO can operate at very low supply voltages, such as 4.5V V.FIFO memory can handle a maximum supply voltage of 5.5V volts.Currently, it has 64 pins.When the frequency is set to 40MHz it can maintain good accuracy.Regular operation has a FIFO memory's maximum value of 40MHz .In normal circumstances, the component has 5V power supplies.
72801L25PFI8 Features
FIFOs category
Frequency at most
72801L25PFI8 Applications
There are a lot of Integrated Device Technology (IDT) 72801L25PFI8 FIFOs Memory applications.
- Computer networks
- Medical Monitoring Device
- High-speed graphics pixel buffer
- Industrial Systems
- Computers
- Disk Controllers
- Network bridges
- General Data Collection Applications at Low-Temperatures
- Analog-to-digital converters
- Address mapping
