72805LB10PF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 128 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 100MHz |
| Pin Count | 128 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 100mA |
| Max Supply Current | 100mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 256X18 |
| Density | 9 kb |
| Standby Current-Max | 0.01A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| Retransmit Capability | No |
| FWFT Support | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72805LB10PF Overview
TQFP is the package in which FIFO memory chip is contained.Mounting it Surface Mount is recommended.With a supply voltage of 5V volts, high efficiency is possible.FIFO means contains 128 terminations.FIFO design has 128 operation pins.In order for FIFO design to operate, FIFO design requires a maximum current of 100mA .Set the supply voltage to 5V to ensure FIFO's maximum efficiency.FIFO operates at a minimum temperature of 0°C degrees Celsius to ensure reliabilFIFOy.70°C °C is the memory logic's maximum operating temperature that allows stable operation.It is self-contained in FIFOs .There is a memory type OTHER FIFO in the IC of this part.It is possible to operate the FIFO memory chip at very low supply voltages, such as 4.5V volts.An input voltage of 5.5V V is the maximum that FIFO memory can handle.There are a total of 128 pins on this FIFO memory IC.When the frequency is set to 100MHz it can maintain good accuracy.Regular operation has a FIFO memory's maximum value of 100MHz .Normally, the component owns 5V power supplies.
72805LB10PF Features
FIFOs category
Frequency at most
72805LB10PF Applications
There are a lot of Integrated Device Technology (IDT) 72805LB10PF FIFOs Memory applications.
- Address mapping
- Smart Meter
- Programmable Logic Controller
- Magnetic memories
- Measurement Equipment
- High-speed graphics pixel buffer
- Code converters
- Product traceability
- General Data Collection Applications at Extreme High-Temperatures
- Test Equipment
