72805LB15PF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 128 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 66.7MHz |
| Pin Count | 128 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 100mA |
| Max Supply Current | 100mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 256X18 |
| Density | 9 kb |
| Standby Current-Max | 0.01A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| Retransmit Capability | No |
| FWFT Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72805LB15PF Overview
FIFO memory chip can be found in the TQFP package.It is recommended that memory IC be mounted in the Surface Mount direction.If the supply voltage is set to 5V , high efficiency can be achieved.I found that it has 128 terminations in FIFO means.There are 128 pins for operation.FIFO requires a minimum of 100mA current to operate.In order to maximize efficiency, the supply voltage should be set to 5V .The FIFO products must be run at a minimum temperature of 0°C degrees Celsius to ensure reliability.As a result of having a maximum operating temperature of 70°C degrees Celsius, the unit is capable of exhibiting stable operation.The gadget is self-contained and can be found in FIFOs .ICs of type OTHER FIFO are used in the FIFO memory chip.If the supply voltage is very low, such as 4.5V V, FIFO may be able to operate.FIFO memory is capable of handling a maximum supply voltage of 5.5V volts.Approximately 128 pins are attached to it.Despite a frequency of 66.7MHz , it is capable of maintaining good accuracy.A FIFO memory's maximum value of 66.7MHz can be used for regular operation.It is normal for the component to own 5V power supplies.
72805LB15PF Features
FIFOs category
Frequency at most
72805LB15PF Applications
There are a lot of Integrated Device Technology (IDT) 72805LB15PF FIFOs Memory applications.
- High-speed disk
- Microprogramming
- SPI Bus Flash Memory Device
- PC peripheral
- Computer networks
- HDD
- Video
- Tape controllers
- Analog-to-digital converters
- Product traceability
