72805LB15PF8
| Parameters | |
|---|---|
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 66.7MHz |
| Pin Count | 128 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 100mA |
| Max Supply Current | 100mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 256X18 |
| Density | 9 kb |
| Standby Current-Max | 0.01A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| Retransmit Capability | No |
| FWFT Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 128 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
72805LB15PF8 Overview
You can find FIFO memory chip in the TQFP package.The recommended mounting way is Surface Mount .A supply voltage of 5V is capable of producing high efficiency.The number of terminations in FIFO means is 128 .There are 128 pins for operation.In order for FIFO design to operate, a maximum current of 100mA is required.The supply voltage should be set to 5V in order to achieve FIFO's maximum efficiency.It operates at 0°C degrees Celsius to ensure reliability.By operating at a temperature of 70°C °C, the FIFO products is capable of stable operation.FIFOs contains this gadget in its entirety.A OTHER FIFO memory type IC is used in the part.FIFO memory chips may be operated at very low supply voltages, such as 4.5V volts.An input voltage of 5.5V V is the maximum that FIFO memory can handle.As a result, it contains a total of 128 pins.In spite of the frequency 66.7MHz , it is capable of maintaining a good level of accuracy.The memory logic's maximum value is 66.7MHz for regular operation.Normally, the component owns 5V power supplies.
72805LB15PF8 Features
FIFOs category
Frequency at most
72805LB15PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72805LB15PF8 FIFOs Memory applications.
- MP3 Interface for Automobile
- Down-Hole Energy Drilling
- Game Consoles
- Medical Monitoring Device
- A/D output buffers
- Disk Controllers
- One assembly
- Test Equipment
- Portable Information Devices
- General Data Collection Applications at Extreme High-Temperatures
