72805LB25PF8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 128 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 40MHz |
| Pin Count | 128 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 100mA |
| Max Supply Current | 100mA |
| Frequency (Max) | 40MHz |
| Access Time | 15 ns |
| Organization | 256X18 |
| Density | 9 kb |
| Standby Current-Max | 0.01A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| Retransmit Capability | No |
| FWFT Support | Yes |
| Output Enable | YES |
| Cycle Time | 25 ns |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72805LB25PF8 Overview
FIFO memory chip can be found in the TQFP package.Memory IC's recommended mounted way is Surface Mount .High efficiency is possible with a supply voltage of 5V .A total of 128 terminations can be found in FIFO means.As far as the operation pins are concerned, they are 128 pins.The maximum current required for its operation is 100mA .FIFO is recommended that the supply voltage be set to 5V for maximum efficiency.It operates at 0°C degrees Celsius to ensure reliability.An operating temperature of 70°C °C is necessary for stable operation.This gadget is self-contained in?FIFOs .It has a type OTHER FIFO memory IC.FIFO may operate at a very low supply voltage, such as 4.5V V.An input voltage of 5.5V V is the maximum that FIFO memory can handle.A total of 128 pins are present on the FIFO memory IC.When the frequency is set to 40MHz it can maintain good accuracy.There is 40MHz FIFO memory IC's maximum value for regular operation.Normally, the component owns 5V power supplies.
72805LB25PF8 Features
FIFOs category
Frequency at most
72805LB25PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72805LB25PF8 FIFOs Memory applications.
- Test Equipment
- Alarm System
- Video
- GPS Offender Tracking
- Data
- Consumer Systems
- Desktop Computers
- Temporary storage elements
- Analog-to-digital converters
- Tape controllers
