7280L12PA8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 56 |
| Published | 2012 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 56 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 125mA |
| Max Supply Current | 125mA |
| Clock Frequency | 50MHz |
| Access Time | 12 ns |
| Density | 2.3 kb |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 20 ns |
| Height Seated (Max) | 1.2mm |
| Length | 14mm |
| Width | 6.1mm |
| Thickness | 1mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
7280L12PA8 Overview
The TSSOP package contains FIFO memory chip.Mounting it Surface Mount is recommended.It is possible to achieve high efficiency with a supply voltage of 5V .FIFO consists of 56 terminations, which indicates that FIFO means is empty.As far as the operation pins are concerned, they are 56 pins.The maximum current required for its operation is 125mA .A 5V supply voltage will ensure FIFO's maximum efficiency.The FIFO products must be run at a minimum temperature of 0°C degrees Celsius to ensure reliability.70°C °C is the memory logic's maximum operating temperature that allows stable operation.This gadget is self-contained in?FIFOs .ICs of type OTHER FIFO are used in the FIFO memory chip.There is a possibility that FIFO can operate at very low supply voltages, such as 4.5V V.A maximum voltage of 5.5V volts can be applied to FIFO memory.This FIFO memory IC is equipped with 56 pins in total.A component normally has 5V power supplies attached to it.Additionally, this FIFO memory is capable of generating RETRANSMIT as well.The clock of the FIFO memory IC runs at 50MHz frequency.
7280L12PA8 Features
FIFOs category
Clock frequency of 50MHz
7280L12PA8 Applications
There are a lot of Integrated Device Technology (IDT) 7280L12PA8 FIFOs Memory applications.
- Networking
- Data-acquisition systems
- Video
- Magnetic memories
- Extended product-change notification
- Optical memories
- Seismic Data Collection at Extreme Temperatures
- One assembly
- PC peripheral
- Address mapping
