7280L15PA
| Parameters | |
|---|---|
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 56 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Number of Circuits | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Memory Size | 256B |
| Element Configuration | Dual |
| Nominal Supply Current | 125mA |
| Max Supply Current | 125mA |
| Frequency (Max) | 40MHz |
| Access Time | 15 ns |
| Data Bus Width | 9b |
| Direction | Bidirectional |
| Density | 2.3 kb |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Length | 14mm |
| Width | 6.1mm |
| Thickness | 1mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 56 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| Subcategory | FIFOs |
| Technology | CMOS |
7280L15PA Overview
You can find FIFO memory chip in the TSSOP package.The FIFO chips have a memory of 256B that can be used to store applications and data.It is recommended that memory IC be mounted in the Surface Mount direction.When the supply voltage is 5V there is the possibility of high efficiency.FIFO consists of 56 terminations, which indicates that FIFO means is empty.56 pin is used for operation.FIFO design requires 125mA amps of current to operate.FIFO is recommended that the supply voltage be set to 5V in order to maximize efficiency.For reliability, FIFO works at a minimum temperature of 0°C degrees Celsius.By operating at 70°C degrees Celsius, this FIFO products is able to maintain a stable operation.The gadget in FIFOs is self-contained.ICs of type OTHER FIFO are used in the FIFO memory chip.There is a possibility that FIFO can operate at very low supply voltages, such as 4.5V V.A maximum voltage of 5.5V volts can be applied to FIFO memory.It consists of a total of 56 pins.Normally, the FIFO memory's maximum value is 40MHz .It is normal for the component to own 5V power supplies.It is also possible to generate RETRANSMIT with the use of this FIFO memory.By using 2 circuits, FIFO memory chip achieves enhanced flexibility.
7280L15PA Features
256B memory size
FIFOs category
Frequency at most
7280L15PA Applications
There are a lot of Integrated Device Technology (IDT) 7280L15PA FIFOs Memory applications.
- Optical memories
- Video
- Industrial Systems
- Firmware loaders
- HDD
- Rate buffers
- Microprogramming
- PC peripheral
- SPI Bus Flash Memory Device
- Computer networks
